Custom Blinds for Swansea, MA Homes

Why Swansea Homeowners Choose Us

Window Works has made custom blinds in Swansea, MA since 1988, from a showroom in town that you can walk into and a team that comes out to measure your windows where they are. Swansea’s houses come in every shape: Ocean Grove and Gardners Neck cottages near Mount Hope Bay, Hortonville farmhouses inland, and post-war ranches along the Route 6 corridor.

Bay-facing rooms take hard afternoon light and salt air, and many of the older cottages have short, wide windows set close to the ceiling. A blind sized to the nearest standard width does not suit any of that. A blind measured in the home and made to the opening does.

• Wood, faux wood, aluminium and vertical blinds
• Measured in your home and installed by our team
• Samples to see and handle in the Swansea showroom

Our Custom Blinds

Wood blinds

Real wood slats with a warm grain, for living rooms, dining rooms, bedrooms and studies.

Faux wood blinds

The look of a painted wood slat in a material that copes with steam, damp and splashes.

Aluminium blinds

Slim slats with a small stack, for narrow, small and short windows.

Vertical blinds

For sliding doors and wide window walls, on a track measured across the whole opening.

Vertical blinds

Plantation shutters

Prefer louvres fitted to the frame? Interior shutters are made to measure too.

Plantation shutters

Cellular shades

Or a soft honeycomb fabric instead of slats, for rooms that need to hold their heat.

Cellular shades

Choosing Custom Blinds in Swansea, MA

Choosing custom blinds in Swansea, MA comes down to three things: the window, the room and the light. A blind made to measure fits the frame without bright gaps at the sides, raises and lowers square and tilts fully closed. Within that, the material, the slat size, the colour and the controls are all chosen for the room the blind is going into. This is how we work through those choices with you.

Bay-facing rooms and hard afternoon light

The rooms in Ocean Grove and Gardners Neck that face Mount Hope Bay get strong afternoon sun, often with glare off the water on top of it. A horizontal blind is one of the most practical answers, because you can tilt the slats to bounce that light up to the ceiling while still seeing out underneath, then close them fully when the sun is low and straight in.

Those same rooms take salt air and damp. Faux wood and aluminium are easy to wipe down and suit the rooms closest to the water. Real wood is warm and handsome, and we will talk through where in the house it fits and where a faux wood slat in the same colour is the more sensible choice.

Hortonville farmhouses

The farmhouses inland in Hortonville tend to have taller, more traditional windows, often with original trim worth keeping on show. For these we look first at an inside mount, with the blind fitted within the frame, and check the depth at each window, because older frames vary from room to room. Wood blinds in a stain that picks up the floors or the doors suit these houses well, with faux wood in the kitchen and bathrooms so the house still reads as one.

Ranches along the Route 6 corridor

The post-war ranches along Route 6 usually mix a wide front window with standard bedroom windows and, often, a sliding door to the back. The front window may suit one wide blind or two side by side, depending on its frame and how you want to raise it. The bedrooms usually take a matching set. The slider is where a vertical blind comes in, on a track measured across the whole opening so it draws clear of the door.

Wood, faux wood, aluminium or vertical

Most houses end up with more than one kind of blind, so here is how the four compare in everyday use.

• Wood: warm and natural, and light to lift for its size. Best kept to living rooms, dining rooms, bedrooms and offices, away from steam.
• Faux wood: the look of a painted wood slat in a material made for moisture. Kitchens, bathrooms, laundry rooms and rooms near the water.
• Aluminium: the slimmest slat and the smallest stack. Narrow and short windows, and rooms where you want the blind to stay quiet.
• Vertical: sliding doors and wide openings, where a horizontal blind would be heavy and awkward.

Slat size and colour are the next choices. A wider slat gives a more open view when tilted, and a narrower one suits a small window. White and soft neutrals keep a room light, and a stained wood slat warms it. The showroom also carries the Norman range, so you can compare those in person alongside everything else.

Inside the frame or over it

Every blind is either fitted inside the window frame or mounted on the wall or trim above it, and the choice changes how the window looks. An inside mount keeps the trim on show and gives a neat, built-in look, which suits the farmhouses and the older cottages with good woodwork. It needs enough depth in the frame for the headrail and for the slats to tilt without hitting a crank handle or a lock.

An outside mount covers the frame, blocks more light around the edges and can make a short window look taller when it is set a little higher. It is often the better answer for a shallow frame, a bedroom that needs to be dark, or a window with hardware in the way. We measure for both and tell you which suits each window, so nothing is left to guesswork when the blinds arrive.

How Your Order Runs

We stay in constant contact with you from the first question until the job is done. An order for custom blinds in Swansea, MA usually runs like this.

1. You call the store or send the form, tell us which rooms you have in mind, and book a free quote.
2. We arrange measuring in your home. A specialist measures every window, checks the frame depth and notes anything unusual, such as a crank handle, a slider or a frame that is out of square.
3. You choose the material, colour, slat size and controls, with samples at home or by comparing in the showroom.
4. You get your quote, window by window.
5. Your blinds are made to the measurements taken in your home.
6. Our team installs them, checks that each one raises, lowers and tilts as it should, and shows you how they work.

Light, privacy and controls

Each room gets its own conversation before anything is ordered. Where do you sit, when is the sun at its worst, who can see in from the road? A bedroom on the bay side may want slats that seal tight and a blind mounted close to the glass. A family room may want an open view through the day and privacy once the lamps go on. A desk by the window is easier on the eyes with the slats turned upward, which sends daylight to the ceiling. In a ranch where the bedrooms sit close to the street, tilting the slats up keeps passers-by from seeing in while the room stays bright.

Then the controls: how the blind lifts and tilts, which side of the window they sit on, and how tall the stack is when the blind is raised. A blind behind a kitchen counter or beside a bed should be easy to reach and never in the way.

Short, Wide Cottage Windows

Many of the older cottages near Mount Hope Bay have short, wide windows set close to the ceiling. They let in good light, but there is little room above them for a headrail and little height for a blind to stack into.

A blind made to that opening solves both. A compact headrail fits the tight space above the glass, and a slim aluminium or narrow wood slat stacks small, so the blind lifts clear of the view when it is raised. Where a run of these windows sits side by side, a matching blind for each one keeps the wall even.

Blinds with drapes, and when a blind is not the answer

A blind can work on its own or behind side drapes that add colour and softness, and Window Works makes drapes and fabric decor as well as blinds, so the two can be chosen together and measured on the same visit. In a main bedroom or a dining room, that pairing handles light, privacy and warmth at once.

Some windows suit something else entirely: a kitchen sink window might be better with café shutters, a bay with shades and drapes, a sunroom with roller shades. If a blind is not the right choice for a window, we will say so and show you what is. Our window treatments page covers the full range.

Blinds across the SouthCoast and the East Bay

Swansea is home, but our team measures and installs custom blinds in 25 towns across the SouthCoast of Massachusetts and the Rhode Island East Bay. Each town has its own page, with notes on its own houses, such as custom blinds in Somerset, just over the Taunton River. Every town we serve is listed on this page.

Looking after your blinds

Care is simple. A soft duster run along the slats now and then is enough for most rooms. Faux wood and aluminium take a damp cloth, which helps in a kitchen or a bay-facing room where salt settles on everything. Real wood prefers a dry cloth only. Turn vertical vanes edge on and dust each side where it hangs.

Blinds you already own can often be put right rather than replaced: a frayed cord, a loose wand or a sticking headrail. Mention it when you call.

What Sets Window Works Apart

Window Works is a family store, founded in Swansea in 1988 and now in its second generation. For more than 37 years it has helped homes across the SouthCoast and the East Bay find the window treatment that suits each room.

• An experienced team of window treatment specialists
• Measuring in your home and installation by our own team
• In constant contact with you until the job is done
• Warranties offered on the products we sell
• A showroom in Swansea where you can see and handle every option before you choose

Visit the showroom

Book Your Free Quote

Use the call button to book a free quote for custom blinds in Swansea, MA, arrange measuring in your home or ask about installation, or send the form and we will be in touch. If you would rather see the samples first, come into the Swansea showroom; the contact page has the directions. Window Works holds a 5.0 rating on Google.