Custom Blinds for Homes in Seekonk, MA

When the Window Is Wider Than the Shelf

The picture window is the window that defines a Seekonk split-level, and it is also the one that sends most people looking for custom blinds in Seekonk, MA. On the splits built in the sixties off Newman Avenue and Arcade Avenue, those windows are wide and shallow: long from side to side, short from top to bottom, and set in a frame with little depth. That shape falls between the sizes sold ready-made, so a stock blind ends up either too narrow, leaving bright strips at each end, or too wide to fit the opening at all.

The ranches around them share some of the same windows, and the newer houses toward the Providence line bring their own mix of larger, more regular openings. Each gets a blind made to the frame it hangs in.

• Wood, faux wood, aluminium and vertical blinds
• Every window measured in your home before anything is made
• Installed by the Window Works team from Swansea

Blinds Made for Each Window Shape

The wide picture window

One blind across the full width or two side by side, depending on the frame and how you want to lift them. Either way, sized to the opening.

Standard double-hung

The bedroom and side windows of a ranch or split. Faux wood or wood, made as a matching set so the house looks even from the road.

Sliding patio doors

Vertical blinds on a track measured to the full width of the slider, drawing to one side so the door opens freely.

Small kitchen and bath windows

Aluminium or faux wood for the little windows over a sink or a tub, where moisture and a tight frame both matter.

Lower-level windows

The short windows in a split’s lower level sit close to the ground. Slats tilted upward let light in and keep the view from outside blocked.

Paired and corner windows

Two windows side by side, or meeting at a corner, get blinds with headrails set to the same height so they read as one.

Custom Blinds in Seekonk, MA and the Stock-Size Problem

Ready-made blinds come in a set run of widths and drops. Most of them assume a window that is taller than it is wide, the shape of a standard double-hung sash. A Seekonk picture window turns that around. It is often several times wider than it is tall, and a blind made for a taller, narrower opening either has too much drop, piling up on the sill, or not enough width.

Making the blind to the opening solves all of it at once. The width matches the frame, the drop matches the glass, and the slats close evenly across the whole window. Below is how we approach the picture window in particular, then the ranches, the newer homes, and the rest of the house.

One blind or two across a picture window

The first question on a wide window is whether to cover it with a single blind or split it into two or three. A single blind gives an unbroken line across the glass and looks clean when lowered. On a very wide window, though, one long blind is heavier to lift and stacks into a long, deep bundle at the top.

Two or three blinds side by side, each made to its own section, are lighter to raise and let you open one part of the window while keeping another closed. That is useful in a living room where the sun comes in at one end in the afternoon. If the window has a centre post or mullion, the split usually falls naturally on it. We look at the frame, the weight and the way you use the room, then show you both before you decide.

Shallow frames and where the blind mounts

Many of the split-level picture windows have shallow frames. An inside mount needs enough depth for the headrail and for the slats to tilt without hitting the glass, and on some of these windows that depth simply is not there. In those cases the blind goes on the trim or the wall above the window, sized to the trim’s width so the window still looks finished.

An outside mount on a wide window has one advantage of its own: when the blind is raised, the stack can sit above the glass instead of across the top of it, keeping the full height of the window clear. On a window that is already short, that matters. Where the depth does allow an inside mount, we use it if you like the look of the trim, and we measure the depth at more than one point, because a long frame is not always even from one end to the other.

Ranches: long rooms and a run of windows

The ranches across Seekonk usually put most of the living space on one floor, with a living room at the front, bedrooms down a hall and a kitchen at the back. That layout means a long run of windows along the front of the house, all visible from the road at once.

For the front of a ranch we usually suggest one colour and one slat across every street-facing window, even where the rooms behind use different materials. Faux wood in a front bathroom can sit beside wood in the living room and look like a single choice from outside. Inside, the bedrooms at the back can take slats that close tight for sleep, while the living room keeps a slat that tilts open for daylight.

Kitchens in these houses often look onto the back yard with a window over the sink and a slider beside the table. A faux wood blind over the sink and a vertical blind on the slider, in matching tones, is a combination we fit often.

The newer homes toward the Providence line

The newer construction toward the Providence line tends to have larger, more regular windows, taller ceilings in the main rooms and sometimes a two-storey entry or family room. Those windows are closer to standard sizes, but a made-to-measure blind still fits better, and the taller rooms bring choices of their own.

On a tall window in a family room, a wider slat gives a more open view when tilted, and a blind with controls set to a comfortable height saves reaching. In a two-storey space, the upper windows may need a different approach entirely, since they are out of reach. We talk through those on the measuring visit and suggest what will work.

Many of these homes also have an open plan where the kitchen, dining area and family room run together. A matching blind across the whole space keeps it calm, with faux wood near the sink and wood elsewhere if you prefer.

Low sun through a wide window

A wide picture window catches a lot of sky, and in a split-level living room that faces south or west, the sun can sit right in the window for part of the afternoon. In winter it comes in low and straight across the room, onto the sofa and the television. In summer it heats the room through the long evening.

A horizontal blind is good at this because the slats can be angled rather than simply opened or closed. Tilted part way, they block the direct beam while still letting daylight into the room. Closed, they cut the glare and some of the heat. On a window split into two or three blinds, you can close only the section the sun is coming through and leave the rest open to the view.

The material plays a part. A wood or faux wood slat is thicker and blocks more light when closed than a thin aluminium one. A lighter colour on the side facing the glass reflects more of the sun back out. We talk through which way each room faces before you choose, so the picture window works in every season and not only on a cloudy day.

Upper-level bedrooms in a split

The bedrooms in a split-level sit half a flight above the living room, often over the garage or the lower level. Their windows are usually standard double-hung, but they face the street or the neighbours at a height where privacy matters and early light comes straight in.

For these rooms we usually suggest a blind fitted closely to the frame with slats that close tight, so morning light stays out. Wood or faux wood in a colour that matches the front of the house keeps the street view even. Choosing custom blinds in Seekonk, MA for every bedroom at once makes sense here, since the windows are often the same size and a matching set looks right from outside.

How Your Order Comes Together

We stay in constant contact with you until the job is done. Here is the usual order of things for custom blinds in Seekonk, MA.

1. Book a free quote through the call button or the form, and tell us which rooms and windows you have in mind.
2. A specialist visits to measure each window in your home, checking frame depth, mullions, cranks and anything else that affects the fit.
3. You pick material, colour, slat size and controls, using samples at home or at the Swansea showroom.
4. You receive a quote that lists every window, so nothing is a surprise.
5. Your blinds are made to the measurements from your home.
6. Our team installs every blind, checks each one lifts, lowers and tilts as it should, and walks you through the controls.
7. If something needs another look afterwards, you call the same store.

Privacy near busy roads

Houses close to the main roads, and those near the commercial stretch through town, see more passing traffic and more headlights at night than houses on a quiet side street. A blind is a simple answer. In the evening, slats closed fully give complete privacy. During the day, slats tilted upward let daylight onto the ceiling while blocking the view in from the pavement or the road.

The lower level of a split is the other place privacy comes up, since those windows sit low and close to the yard. A blind that closes tight and fits the frame without side gaps makes a family room or a home office down there feel properly private.

Controls on a long blind

A wide blind needs its controls placed with some thought. On a picture window behind a sofa, the cord and the tilt wand should sit at the end you can reach without leaning over the furniture. On a window split into two blinds, the controls often look best at the two outer ends, so the middle stays clean and each blind is worked from its own side.

Length matters too. A cord that hangs to the floor on a short picture window gets in the way and looks untidy, so we set each control to suit the height of the window and the room. In a home with small children or pets, we talk about keeping cords short and out of reach, and a wand for tilting is usually the simplest choice.

On the lower level of a split, where windows sit high on the wall, the opposite applies: the controls need to reach down to a comfortable height. We note all of this on the measuring visit, window by window, so the finished blinds are easy to use from the day they go up.

Which material where

Wood blinds give real grain and warmth, and they are a good fit for living rooms, dining rooms and bedrooms. They are best kept out of steamy rooms.

Faux wood looks like painted wood and copes with moisture. Kitchens, bathrooms and laundry rooms on the lower level are its usual place.

Aluminium has a slim slat that stacks small, useful on short or narrow windows and in modern rooms.

Vertical blinds cover sliders and very wide openings, where a horizontal blind would be too heavy to lift easily. Our vertical blinds in Seekonk page goes into them in detail.

Colour and slat width finish the choice. A wider slat opens up the view on a picture window, while a narrower one suits a small bedroom window. Lighter colours keep a room bright, and stained tones warm it.

When another treatment suits better

A split-level entry, with its short flights of stairs up and down, often has a window by the front door. A blind can work there, and so can a cellular shade, which gives soft light and privacy in one piece. A living room picture window might pair a blind with side drapes for colour. Window Works makes shades, shutters, drapes and fabric decor as well as blinds, so if a blind is not the best answer for a window, we say so. You can see every service for the town on our window treatments for Seekonk homes page, and the full blind range on our custom blinds page.

Keeping your blinds working

A quick dusting keeps slats looking right. Faux wood and aluminium wipe clean with a damp cloth, and wood should be kept dry. If a cord or wand fails on a blind you already own, our blind and shade repair in Seekonk page explains what our team can do.

A Family Store Since 1988

Window Works opened in Swansea in 1988 and is now in its second generation. For over 37 years we have made and fitted window treatments for homes across the SouthCoast and the Rhode Island East Bay, and Seekonk is a short drive up the road.

• An experienced team of window treatment specialists
• Measuring in your home, so wide and odd-sized windows are made to fit
• Installation by our own team
• Tailored solutions for each house
• In constant contact until the job is done, with warranties offered

Try the Samples in Person

At the Swansea showroom you can compare wood, faux wood and aluminium slats side by side, try the lift and tilt, and see colours in daylight before choosing custom blinds in Seekonk, MA. It is also where you can see the Norman range in person.

Bring a measurement or a photo of your picture window, and our specialists will help you work out whether one blind or two suits it best.

Visit the showroom

Take the First Step

Start with a free quote. The call button connects you with the Swansea store, where you can arrange measuring in your home or ask about installation, and the form works just as well. If you would like to see the samples before anything else, find the showroom directions on the contact page. Window Works has a 5.0 rating on Google.